Fault finder: Clock rollover timer bug lab
7 checks for this build on the Nano. Work from the top: power first, then each part, then the code.
0 of 7 checked
Power🔧 DC volts, 20 V rangeCheck 1 of 7
Nano supply pin
Plug the Nano into USB. Black probe on a GND pin, red probe on the 5V pin of the board.
You should see: 4.6 to 5.3 V
Readings are compared with the ranges for this build's parts. A meter on the wrong range or a loose probe gives odd numbers: check those first.
Common faults in this build
Both LEDs misbehave: what should I check?
Check the second timer uses subtraction.
Neither LED blinks: what should I check?
Check the LED direction and pins.
No wrap message: what should I check?
Set 9600 baud and wait a little longer.
LEDs flicker from the start: what should I check?
Check INTERVAL is 500.
Upload fails: what should I check?
Choose the Old Bootloader option.
