Fault finder: Mini MIDI keyboard
9 checks for this build on the board. Work from the top: power first, then each part, then the code.
0 of 9 checked
Power🔧 DC volts, 20 V rangeCheck 1 of 9
board supply pin
Plug the board into USB. Black probe on a GND pin, red probe on the 5V pin of the board.
You should see: 4.6 to 5.3 V
Readings are compared with the ranges for this build's parts. A meter on the wrong range or a loose probe gives odd numbers: check those first.
Common faults in this build
Keys give the wrong note: what should I check?
Check the row and column order against the pin arrays.
A key never registers: what should I check?
Check the diode direction for that key.
Ghost notes: what should I check?
A diode is missing or reversed.
Notes hang: what should I check?
Check the octave was not changed while a key was held; release first.
