Fault finder: Morning temperature tracker

11 checks for this build on the Nano. Work from the top: power first, then each part, then the code.

0 of 11 checked
Power🔧 DC volts, 20 V rangeCheck 1 of 11

Nano supply pin

Plug the Nano into USB. Black probe on a GND pin, red probe on the 5V pin of the board.

You should see: 4.6 to 5.3 V

V

Readings are compared with the ranges for this build's parts. A meter on the wrong range or a loose probe gives odd numbers: check those first.

Common faults in this build

Reading looks low: what should I check?

Wait longer for the sensor to settle, keep it in contact.

Chart is empty: what should I check?

It needs at least two days of data.

Wrong date: what should I check?

Set the RTC and replace its coin cell.

Values jump: what should I check?

Use the same position every morning.