Fault finder: Sixteen-button sound board
7 checks for this build on the board. Work from the top: power first, then each part, then the code.
0 of 7 checked
Power🔧 DC volts, 20 V rangeCheck 1 of 7
board supply pin
Plug the board into USB. Black probe on a GND pin, red probe on the 5V pin of the board.
You should see: 4.6 to 5.3 V
Readings are compared with the ranges for this build's parts. A meter on the wrong range or a loose probe gives odd numbers: check those first.
Common faults in this build
A pad is silent: what should I check?
Check its wire reaches the right pin and the ground rail.
Notes stick on: what should I check?
A button is shorted to ground, check the wiring.
Recording does nothing: what should I check?
Check the record button is on pin 38.
Playback is empty: what should I check?
Record at least one note first.
Buzzer is quiet: what should I check?
Use a passive buzzer on pin 8.
