Fault finder: Heart rate breathing coach
5 checks for this build on the Nano. Work from the top: power first, then each part, then the code.
0 of 5 checked
Power🔧 DC volts, 20 V rangeCheck 1 of 5
Nano supply pin
Plug the Nano into USB. Black probe on a GND pin, red probe on the 5V pin of the board.
You should see: 4.6 to 5.3 V
Readings are compared with the ranges for this build's parts. A meter on the wrong range or a loose probe gives odd numbers: check those first.
Common faults in this build
No beats found: what should I check?
Press the finger gently and keep still.
Wild bpm: what should I check?
Shield the sensor from room light.
Ring too bright: what should I check?
Lower the brightness value.
