Fault finder: Scrolling message display with MAX7219

5 checks for this build on the Uno. Work from the top: power first, then each part, then the code.

0 of 5 checked
Power🔧 DC volts, 20 V rangeCheck 1 of 5

Uno supply pin

Plug the Uno into USB. Black probe on a GND pin, red probe on the 5V pin of the board.

You should see: 4.6 to 5.3 V

V

Readings are compared with the ranges for this build's parts. A meter on the wrong range or a loose probe gives odd numbers: check those first.

Common faults in this build

Letters are mirrored or rotated: what should I check?

Change FC16_HW to GENERIC_HW (or PAROLA_HW).

Only the first module works: what should I check?

Check DOUT of module 1 goes to DIN of module 2, and the chain count is 4.

Random dots: what should I check?

Use short wires and power the modules from a 2 A supply.