Fault finder: Family message board
5 checks for this build on the board. Work from the top: power first, then each part, then the code.
0 of 5 checked
Power🔧 DC volts, 20 V rangeCheck 1 of 5
board supply pin
Plug the board into USB. Black probe on a GND pin, red probe on the 5V pin of the board.
You should see: 4.6 to 5.3 V
Readings are compared with the ranges for this build's parts. A meter on the wrong range or a loose probe gives odd numbers: check those first.
Common faults in this build
Text is mirrored: what should I check?
Change the hardware type.
Page does not load: what should I check?
Check the IP address and that the phone is on the same network.
Garbled letters: what should I check?
Check the chain order and the 5 V supply.
Resets: what should I check?
Use a 5 V 1 A supply.
