Fault finder: Loop jitter histogram

7 checks for this build on the Nano. Work from the top: power first, then each part, then the code.

0 of 7 checked
Power🔧 DC volts, 20 V rangeCheck 1 of 7

Nano supply pin

Plug the Nano into USB. Black probe on a GND pin, red probe on the 5V pin of the board.

You should see: 4.6 to 5.3 V

V

Readings are compared with the ranges for this build's parts. A meter on the wrong range or a loose probe gives odd numbers: check those first.

Common faults in this build

Nothing prints: what should I check?

Set 115200 baud in the serial monitor.

All passes in one bin: what should I check?

The job is very steady, try a longer job.

Text is garbled: what should I check?

Check the baud rate and that dots are not mixed in.

Mode never changes: what should I check?

Hold the button as a new run begins.

Upload fails: what should I check?

Choose the Old Bootloader option.