Fault finder: Logic gate truth table lab

9 checks for this build on the board. Work from the top: power first, then each part, then the code.

0 of 9 checked
Power🔧 DC volts, 20 V rangeCheck 1 of 9

board supply pin

Plug the board into USB. Black probe on a GND pin, red probe on the 5V pin of the board.

You should see: 4.6 to 5.3 V

V

Readings are compared with the ranges for this build's parts. A meter on the wrong range or a loose probe gives odd numbers: check those first.

Common faults in this build

LED always on or off: what should I check?

An input is floating or wired to the wrong pin. Check the pin numbers for that chip.

Results look random: what should I check?

Unused inputs are floating. Tie them to GND.

NOR gives wrong answers: what should I check?

Its pinout differs: output on pin 1.

Chip gets warm: what should I check?

VCC and GND are swapped. Disconnect power at once.