Fault finder: Li-po safe charging box

8 checks for this build on the Nano. Work from the top: power first, then each part, then the code.

0 of 8 checked
Power🔧 DC volts, 20 V rangeCheck 1 of 8

Nano supply pin

Plug the Nano into USB. Black probe on a GND pin, red probe on the 5V pin of the board.

You should see: 4.6 to 5.3 V

V

Readings are compared with the ranges for this build's parts. A meter on the wrong range or a loose probe gives odd numbers: check those first.

Common faults in this build

No temperature printed: what should I check?

Check the 4.7 k pull-up and wiring.

Always alarms: what should I check?

Sensor wire loose or DS18B20 pins reversed.

Fuse opens during normal charging: what should I check?

Move it away from the charger's own heat.