Fault finder: Per-cell LiPo monitor

10 checks for this build on the Nano. Work from the top: power first, then each part, then the code.

0 of 10 checked
Power🔧 DC volts, 20 V rangeCheck 1 of 10

Nano supply pin

Plug the Nano into USB. Black probe on a GND pin, red probe on the 5V pin of the board.

You should see: 4.6 to 5.3 V

V

Readings are compared with the ranges for this build's parts. A meter on the wrong range or a loose probe gives odd numbers: check those first.

Common faults in this build

Readings jump: what should I check?

Add a small capacitor from each divider output to GND, or average more.

Cell values look wrong: what should I check?

Check the tap order on the connector.

All zero: what should I check?

The balance lead ground is not joined to the Nano ground.