Fault finder: Lights-out puzzle
9 checks for this build on the Nano. Work from the top: power first, then each part, then the code.
0 of 9 checked
Power🔧 DC volts, 20 V rangeCheck 1 of 9
Nano supply pin
Plug the Nano into USB. Black probe on a GND pin, red probe on the 5V pin of the board.
You should see: 4.6 to 5.3 V
Readings are compared with the ranges for this build's parts. A meter on the wrong range or a loose probe gives odd numbers: check those first.
Common faults in this build
Blocks appear in the wrong places: what should I check?
Change SERPENTINE to false.
Nothing lights: what should I check?
Check DIN goes to the input end of the matrix, not DOUT.
A button does nothing: what should I check?
Check its legs straddle the breadboard centre gap and one goes to GND.
Colours look wrong: what should I check?
Your matrix may be RGB ordered, change NEO_GRB to NEO_RGB.
Matrix flickers: what should I check?
Check the grounds are joined and the wires are short.
