Projects / Light painting wand / Fault finder

Fault finder: Light painting wand

9 checks for this build on the ESP32. Work from the top: power first, then each part, then the code.

0 of 9 checked
Power🔧 DC volts, 20 V rangeCheck 1 of 9

ESP32 supply pin

Plug the ESP32 into USB. Black probe on a GND pin, red probe on the 3V3 pin of the board.

You should see: 3.15 to 3.45 V

V

Readings are compared with the ranges for this build's parts. A meter on the wrong range or a loose probe gives odd numbers: check those first.

Common faults in this build

Could not load: what should I check?

Check the file is 24-bit, 60 pixels high and under 200 wide.

Colours wrong: what should I check?

The BMP order is blue, green, red; the code swaps it, so check the file type.

Picture mirrored: what should I check?

Reverse the loop or walk the other way.

Battery drains fast: what should I check?

Lower the brightness.