Fault finder: Temperature graph on a graphic LCD

7 checks for this build on the Uno. Work from the top: power first, then each part, then the code.

0 of 7 checked
Power🔧 DC volts, 20 V rangeCheck 1 of 7

Uno supply pin

Plug the Uno into USB. Black probe on a GND pin, red probe on the 5V pin of the board.

You should see: 4.6 to 5.3 V

V

Readings are compared with the ranges for this build's parts. A meter on the wrong range or a loose probe gives odd numbers: check those first.

Common faults in this build

Blank screen: what should I check?

Check PSB is on GND and the pin order of E, R/W and RS.

No line: what should I check?

Wait for at least two readings.

Reads -127: what should I check?

DS18B20 not found. Check the pull-up.

Graph looks flat: what should I check?

The minimum scale span is 2 degrees; warm the probe to see change.