Fault finder: Laser tripwire alarm

10 checks for this build on the Nano. Work from the top: power first, then each part, then the code.

0 of 10 checked
Power🔧 DC volts, 20 V rangeCheck 1 of 10

Nano supply pin

Plug the Nano into USB. Black probe on a GND pin, red probe on the 5V pin of the board.

You should see: 4.6 to 5.3 V

V

Readings are compared with the ranges for this build's parts. A meter on the wrong range or a loose probe gives odd numbers: check those first.

Common faults in this build

Alarm on at start: what should I check?

The laser is not hitting the LDR when the baseline is read. Align it again.

No alarm when the beam is broken: what should I check?

Room light gets in the tube, so the LDR barely changes. Lengthen the tube.

Laser is dim: what should I check?

Check supply and polarity, and that the module is a 5 V type.

Random alarms: what should I check?

The laser or LDR moved. Fix them to rigid supports.