Fault finder: Door knock counter
7 checks for this build on the Uno. Work from the top: power first, then each part, then the code.
0 of 7 checked
Power🔧 DC volts, 20 V rangeCheck 1 of 7
Uno supply pin
Plug the Uno into USB. Black probe on a GND pin, red probe on the 5V pin of the board.
You should see: 4.6 to 5.3 V
Readings are compared with the ranges for this build's parts. A meter on the wrong range or a loose probe gives odd numbers: check those first.
Common faults in this build
Every knock counts twice: what should I check?
Increase LOCKOUT_MS to 200.
Nothing counts: what should I check?
Lower THRESHOLD and check the 1 megohm resistor is in place.
Random counts: what should I check?
A loose disc or lead is buzzing, tape it down firmly.
Readings stay high: what should I check?
Check the diode orientation and the 1 megohm resistor.
LED stays on: what should I check?
Check the LED legs and the pin number.
