Projects / Knob menu selector / Fault finder

Fault finder: Knob menu selector

13 checks for this build on the Nano. Work from the top: power first, then each part, then the code.

0 of 13 checked
Power🔧 DC volts, 20 V rangeCheck 1 of 13

Nano supply pin

Plug the Nano into USB. Black probe on a GND pin, red probe on the 5V pin of the board.

You should see: 4.6 to 5.3 V

V

Readings are compared with the ranges for this build's parts. A meter on the wrong range or a loose probe gives odd numbers: check those first.

Common faults in this build

Blank screen: what should I check?

Check A4 and A5 and the OLED address.

Highlight flickers: what should I check?

Increase the 20 count margin in the sketch.

Knob moves the wrong way: what should I check?

Swap the V and G connections.

Button runs twice: what should I check?

Increase the 40 millisecond lockout.

Top row never highlights: what should I check?

Check the S pin is on A0.