Fault finder: Kitchen recipe screen with timers

8 checks for this build on the board. Work from the top: power first, then each part, then the code.

0 of 8 checked
Power🔧 DC volts, 20 V rangeCheck 1 of 8

board supply pin

Plug the board into USB. Black probe on a GND pin, red probe on the 5V pin of the board.

You should see: 4.6 to 5.3 V

V

Readings are compared with the ranges for this build's parts. A meter on the wrong range or a loose probe gives odd numbers: check those first.

Common faults in this build

Blank page: what should I check?

Check the Flask app is running on port 5000.

No buzzer: what should I check?

Check GPIO18 and the buzzer polarity.

Touch off by an offset: what should I check?

Check the display's rotation setting.

Kiosk not starting: what should I check?

Check the autostart file for your desktop.