Fault finder: Kids' drum pad toy
9 checks for this build on the Nano. Work from the top: power first, then each part, then the code.
0 of 9 checked
Power🔧 DC volts, 20 V rangeCheck 1 of 9
Nano supply pin
Plug the Nano into USB. Black probe on a GND pin, red probe on the 5V pin of the board.
You should see: 4.6 to 5.3 V
Readings are compared with the ranges for this build's parts. A meter on the wrong range or a loose probe gives odd numbers: check those first.
Common faults in this build
No sound: what should I check?
The SD card is not FAT32 or the files are named wrongly. Check the DFPlayer's LED.
Double triggers: what should I check?
Raise the lockout time or the threshold.
Pads trigger each other: what should I check?
Mount each pad separately so vibration does not carry.
Buzzing speaker: what should I check?
Power from a good supply and keep the speaker lead short.
