Fault finder: Joystick-controlled pan-tilt camera mount

8 checks for this build on the Uno. Work from the top: power first, then each part, then the code.

0 of 8 checked
Power🔧 DC volts, 20 V rangeCheck 1 of 8

Uno supply pin

Plug the Uno into USB. Black probe on a GND pin, red probe on the 5V pin of the board.

You should see: 4.6 to 5.3 V

V

Readings are compared with the ranges for this build's parts. A meter on the wrong range or a loose probe gives odd numbers: check those first.

Common faults in this build

Slow drift with the stick centred: what should I check?

Widen the dead zone from 60 to 90.

Servos jitter: what should I check?

Use the separate AA supply and the capacitor, and keep servo wires away from the joystick wires.

Tilt goes the wrong way: what should I check?

Change the minus to a plus in the tiltAngle line.