Fault finder: Jetson first boot and demo apps

5 checks for this build on the board. Work from the top: power first, then each part, then the code.

0 of 5 checked
Power🔧 DC volts, 20 V rangeCheck 1 of 5

board supply pin

Plug the board into USB. Black probe on a GND pin, red probe on the 5V pin of the board.

You should see: 4.6 to 5.3 V

V

Readings are compared with the ranges for this build's parts. A meter on the wrong range or a loose probe gives odd numbers: check those first.

Common faults in this build

No picture: what should I check?

Check the display adapter and try another cable.

Camera not found: what should I check?

Reseat the ribbon with contacts the right way round and check the connector latch.

First demo seems stuck: what should I check?

Engines are being built, wait several minutes.

Frame rate low: what should I check?

Check the power mode and the fan.

Board hot: what should I check?

Improve airflow, or drop to a lower power mode.