Fault finder: IR remote button code reader
8 checks for this build on the Nano. Work from the top: power first, then each part, then the code.
0 of 8 checked
Power🔧 DC volts, 20 V rangeCheck 1 of 8
Nano supply pin
Plug the Nano into USB. Black probe on a GND pin, red probe on the 5V pin of the board.
You should see: 4.6 to 5.3 V
Readings are compared with the ranges for this build's parts. A meter on the wrong range or a loose probe gives odd numbers: check those first.
Common faults in this build
Nothing prints: what should I check?
Check the pin order and that the remote has working batteries.
Garbled commands: what should I check?
Check the receiver is on 5V and the wires are firm.
Library errors: what should I check?
Install IRremote version 4 and use the .hpp include.
LED does not toggle: what should I check?
Check the command number matches exactly.
Works only very close: what should I check?
Aim the remote straight at the dome.
