Fault finder: One-year battery door sensor
7 checks for this build on the ESP32. Work from the top: power first, then each part, then the code.
0 of 7 checked
Power🔧 DC volts, 20 V rangeCheck 1 of 7
ESP32 supply pin
Plug the ESP32 into USB. Black probe on a GND pin, red probe on the 3V3 pin of the board.
You should see: 3.15 to 3.45 V
Readings are compared with the ranges for this build's parts. A meter on the wrong range or a loose probe gives odd numbers: check those first.
Common faults in this build
No wake: what should I check?
Check the pull-up and the wake level logic.
No packet: what should I check?
Check the receiver is on and in range.
High sleep current: what should I check?
Remove the board LED and extra parts.
Reboots: what should I check?
Battery too low for the chip.
