Fault finder: Smart water bottle
5 checks for this build on the board. Work from the top: power first, then each part, then the code.
0 of 5 checked
Power🔧 DC volts, 20 V rangeCheck 1 of 5
board supply pin
Plug the board into USB. Black probe on a GND pin, red probe on the 5V pin of the board.
You should see: 4.6 to 5.3 V
Readings are compared with the ranges for this build's parts. A meter on the wrong range or a loose probe gives odd numbers: check those first.
Common faults in this build
Reading jumps: what should I check?
Hold the bottle upright and average several readings.
Always out of range: what should I check?
Check the sensor faces the water without a wall in the way.
Wrong volume: what should I check?
Recalibrate EMPTY_MM and FULL_MM.
LED never glows: what should I check?
Check the data pin and the half-hour condition.
