Fault finder: Water reminder for elderly
5 checks for this build on the Nano. Work from the top: power first, then each part, then the code.
0 of 5 checked
Power🔧 DC volts, 20 V rangeCheck 1 of 5
Nano supply pin
Plug the Nano into USB. Black probe on a GND pin, red probe on the 5V pin of the board.
You should see: 4.6 to 5.3 V
Readings are compared with the ranges for this build's parts. A meter on the wrong range or a loose probe gives odd numbers: check those first.
Common faults in this build
Weight drifts: what should I check?
Let the cell warm up and use stiff plates.
Sips not counted: what should I check?
Lower the 10 g threshold.
Glow does not start: what should I check?
Shorten REMIND_MS to test.
Wrong grams: what should I check?
Recalibrate with a known weight.
