Fault finder: Home Assistant hub on a Raspberry Pi
9 checks for this build on the ESP32. Work from the top: power first, then each part, then the code.
0 of 9 checked
Power🔧 DC volts, 20 V rangeCheck 1 of 9
ESP32 supply pin
Plug the ESP32 into USB. Black probe on a GND pin, red probe on the 3V3 pin of the board.
You should see: 3.15 to 3.45 V
Readings are compared with the ranges for this build's parts. A meter on the wrong range or a loose probe gives odd numbers: check those first.
Common faults in this build
homeassistant.local not found: what should I check?
Use the Pi's address from your router.
ESP32 not discovered: what should I check?
Check both are on the same network and the API key matches.
DHT22 reads unknown: what should I check?
Check the data pin and its pull-up.
