Fault finder: Higher or lower game

13 checks for this build on the Nano. Work from the top: power first, then each part, then the code.

0 of 13 checked
Power🔧 DC volts, 20 V rangeCheck 1 of 13

Nano supply pin

Plug the Nano into USB. Black probe on a GND pin, red probe on the 5V pin of the board.

You should see: 4.6 to 5.3 V

V

Readings are compared with the ranges for this build's parts. A meter on the wrong range or a loose probe gives odd numbers: check those first.

Common faults in this build

Blank screen: what should I check?

Check A4 and A5 and the OLED address.

Guess jumps around: what should I check?

Turn the knob slowly, the pot may be noisy.

Same secret every game: what should I check?

Check the random seed line.

Button counts twice: what should I check?

Increase the 40 millisecond lockout.

Cannot reach 100: what should I check?

Check the pot ends are on 5V and GND.