Fault finder: Urban heat island street survey

7 checks for this build on the Nano. Work from the top: power first, then each part, then the code.

0 of 7 checked
Power🔧 DC volts, 20 V rangeCheck 1 of 7

Nano supply pin

Plug the Nano into USB. Black probe on a GND pin, red probe on the 5V pin of the board.

You should see: 4.6 to 5.3 V

V

Readings are compared with the ranges for this build's parts. A meter on the wrong range or a loose probe gives odd numbers: check those first.

Common faults in this build

Nothing logged: what should I check?

Wait for a GPS fix and check the SD card format.

Readings look warm: what should I check?

Move the sensor away from heat and use the shield.

GPS stops in a tunnel: what should I check?

It resumes after leaving the tunnel.

SD errors: what should I check?

Use a card of 32 GB or less, formatted FAT32.