Fault finder: Head-controlled mouse

11 checks for this build on the board. Work from the top: power first, then each part, then the code.

0 of 11 checked
Power🔧 DC volts, 20 V rangeCheck 1 of 11

board supply pin

Plug the board into USB. Black probe on a GND pin, red probe on the 5V pin of the board.

You should see: 4.6 to 5.3 V

V

Readings are compared with the ranges for this build's parts. A meter on the wrong range or a loose probe gives odd numbers: check those first.

Common faults in this build

Pointer drifts: what should I check?

Recalibrate the bias with the head still.

Moves too fast: what should I check?

Reduce the multiplier 18.

Clicks by accident: what should I check?

Lengthen the dwell time.

Moves in the wrong direction: what should I check?

Change the signs or the axes.