Fault finder: H-bridge from discrete transistors

7 checks for this build on the board. Work from the top: power first, then each part, then the code.

0 of 7 checked
Power🔧 DC volts, 20 V rangeCheck 1 of 7

board supply pin

Plug the board into USB. Black probe on a GND pin, red probe on the 5V pin of the board.

You should see: 4.6 to 5.3 V

V

Readings are compared with the ranges for this build's parts. A meter on the wrong range or a loose probe gives odd numbers: check those first.

Common faults in this build

Motor does not run: what should I check?

Check the pin order and the base resistors.

Transistors hot: what should I check?

Check for shoot-through.

Weak speed: what should I check?

Darlingtons drop about 1.5 V on each side.

Spikes: what should I check?

Check diode direction.