Projects / Guitar tuner / Fault finder

Fault finder: Guitar tuner

9 checks for this build on the ESP32. Work from the top: power first, then each part, then the code.

0 of 9 checked
Power🔧 DC volts, 20 V rangeCheck 1 of 9

ESP32 supply pin

Plug the ESP32 into USB. Black probe on a GND pin, red probe on the 3V3 pin of the board.

You should see: 3.15 to 3.45 V

V

Readings are compared with the ranges for this build's parts. A meter on the wrong range or a loose probe gives odd numbers: check those first.

Common faults in this build

Always says pluck a string: what should I check?

Move the microphone closer or lower the quiet threshold.

Wrong octave: what should I check?

Pluck harder and check the first-peak search; the string may be drowned by a harmonic.

Jumpy readings: what should I check?

Wait for the note to settle and try the lower strings first.

OLED blank: what should I check?

Check the I2C address 0x3C and the SDA and SCL pins.