Fault finder: Higher or lower number game
7 checks for this build on the Nano. Work from the top: power first, then each part, then the code.
0 of 7 checked
Power🔧 DC volts, 20 V rangeCheck 1 of 7
Nano supply pin
Plug the Nano into USB. Black probe on a GND pin, red probe on the 5V pin of the board.
You should see: 4.6 to 5.3 V
Readings are compared with the ranges for this build's parts. A meter on the wrong range or a loose probe gives odd numbers: check those first.
Common faults in this build
Knob turns the wrong way: what should I check?
Swap the sign on the direction line.
Number skips: what should I check?
Add 100 nanofarad capacitors from CLK and DT to GND.
Display blank: what should I check?
Check CLK to D5 and DIO to D6.
Press does nothing: what should I check?
Check SW goes to D4.
Library not found: what should I check?
Install TM1637Display.
