Fault finder: Log sensor data to Google Sheets

7 checks for this build on the ESP32. Work from the top: power first, then each part, then the code.

0 of 7 checked
Power🔧 DC volts, 20 V rangeCheck 1 of 7

ESP32 supply pin

Plug the ESP32 into USB. Black probe on a GND pin, red probe on the 3V3 pin of the board.

You should see: 3.15 to 3.45 V

V

Readings are compared with the ranges for this build's parts. A meter on the wrong range or a loose probe gives odd numbers: check those first.

Common faults in this build

Serial shows 302 or -1: what should I check?

The redirect was not followed or Wi-Fi dropped. Keep setFollowRedirects.

No rows: what should I check?

The web app access is not set to anyone, or the URL has an old deployment ID. Re-deploy.

NaN readings: what should I check?

Check the DHT22 pull-up and wiring.

Rows stop after a while: what should I check?

Wi-Fi dropped. Add a reconnect check in loop().