Fault finder: Running safety vest with lights

7 checks for this build on the board. Work from the top: power first, then each part, then the code.

0 of 7 checked
Power🔧 DC volts, 20 V rangeCheck 1 of 7

board supply pin

Plug the board into USB. Black probe on a GND pin, red probe on the 5V pin of the board.

You should see: 4.6 to 5.3 V

V

Readings are compared with the ranges for this build's parts. A meter on the wrong range or a loose probe gives odd numbers: check those first.

Common faults in this build

Flashes more than once per step: what should I check?

Raise the swing threshold or the minimum time.

Never turns on: what should I check?

Raise DARK or check the divider.

Strip dim: what should I check?

Check the cell voltage and the brightness setting.

Wrong colours: what should I check?

Change NEO_GRB to NEO_RGB.