Fault finder: Gesture media control
5 checks for this build on the board. Work from the top: power first, then each part, then the code.
0 of 5 checked
Power🔧 DC volts, 20 V rangeCheck 1 of 5
board supply pin
Plug the board into USB. Black probe on a GND pin, red probe on the 5V pin of the board.
You should see: 4.6 to 5.3 V
Readings are compared with the ranges for this build's parts. A meter on the wrong range or a loose probe gives odd numbers: check those first.
Common faults in this build
APDS-9960 not found: what should I check?
Check the 3V3 supply, SDA and SCL pins.
Gestures wrong way: what should I check?
Rotate the sensor or swap the mappings.
Gestures missed: what should I check?
Swipe more slowly and closer, and avoid direct sunlight.
No keys sent: what should I check?
The Leonardo must appear as a USB device; check the cable.
