Fault finder: Fridge door left-open beeper

7 checks for this build on the Nano. Work from the top: power first, then each part, then the code.

0 of 7 checked
Power🔧 DC volts, 20 V rangeCheck 1 of 7

Nano supply pin

Plug the Nano into USB. Black probe on a GND pin, red probe on the 5V pin of the board.

You should see: 4.6 to 5.3 V

V

Readings are compared with the ranges for this build's parts. A meter on the wrong range or a loose probe gives odd numbers: check those first.

Common faults in this build

Beeps when the door is closed: what should I check?

The magnet is too far from the switch, move them closer.

Never beeps: what should I check?

Check the reed switch is wired to D2 and GND.

False alarms: what should I check?

Increase the 100 ms filter or fix the magnet more firmly.

Reed switch breaks: what should I check?

Glass is fragile, mount it with tape, and do not bend its leads close to the glass.

Buzzer is silent: what should I check?

Use a passive buzzer with tone(), and check its polarity.