Fault finder: Shake-to-answer magic ball

9 checks for this build on the board. Work from the top: power first, then each part, then the code.

0 of 9 checked
Power🔧 DC volts, 20 V rangeCheck 1 of 9

board supply pin

Plug the board into USB. Black probe on a GND pin, red probe on the 5V pin of the board.

You should see: 4.6 to 5.3 V

V

Readings are compared with the ranges for this build's parts. A meter on the wrong range or a loose probe gives odd numbers: check those first.

Common faults in this build

Nothing on screen: what should I check?

Check the SPI wiring and reset pin.

Answers on every tilt: what should I check?

Raise the shake count.

No shake detected: what should I check?

Lower the count or shake harder.

Wrong pins: what should I check?

Select the XIAO RP2040 board so D0 to D10 are defined.