Fault finder: Flameless candle
9 checks for this build on the Nano. Work from the top: power first, then each part, then the code.
0 of 9 checked
Power🔧 DC volts, 20 V rangeCheck 1 of 9
Nano supply pin
Plug the Nano into USB. Black probe on a GND pin, red probe on the 5V pin of the board.
You should see: 4.6 to 5.3 V
Readings are compared with the ranges for this build's parts. A meter on the wrong range or a loose probe gives odd numbers: check those first.
Common faults in this build
No flicker, steady light: what should I check?
Check the LEDs are on D5 and D6, which are PWM pins.
Flicker looks jumpy: what should I check?
Lower the 0.25 smoothing value a little.
Too dim: what should I check?
Raise the lower target range.
Both LEDs flicker the same: what should I check?
Check both use their own random targets.
Button does nothing: what should I check?
Check D2 to GND.
