Fault finder: Firefly jar
9 checks for this build on the board. Work from the top: power first, then each part, then the code.
0 of 9 checked
Power🔧 DC volts, 20 V rangeCheck 1 of 9
board supply pin
Plug the board into USB. Black probe on a GND pin, red probe on the 5V pin of the board.
You should see: 4.6 to 5.3 V
Readings are compared with the ranges for this build's parts. A meter on the wrong range or a loose probe gives odd numbers: check those first.
Common faults in this build
Two LEDs light together: what should I check?
One LED is in backwards.
Never dark: what should I check?
Raise the threshold or use a smaller resistor.
Blinks in daylight: what should I check?
Check the 100 k resistor to ground.
