Fault finder: Transistor switch fault hunt
9 checks for this build on the board. Work from the top: power first, then each part, then the code.
0 of 9 checked
Power🔧 DC volts, 20 V rangeCheck 1 of 9
board supply pin
Plug the board into USB. Black probe on a GND pin, red probe on the 5V pin of the board.
You should see: 4.6 to 5.3 V
Readings are compared with the ranges for this build's parts. A meter on the wrong range or a loose probe gives odd numbers: check those first.
Common faults in this build
LED dark even when built as drawn: what should I check?
Check the transistor leg order against the datasheet.
LED always on: what should I check?
Check the button, and the base is not touching the collector.
Transistor feels warm: what should I check?
Disconnect and check the 470 ohm resistor is in the LED path.
Meter reads nothing: what should I check?
Switch to DC volts and check the probes.
Base reads 9 V: what should I check?
The base resistor is missing, disconnect at once.
