Fault finder: ESP32 Wi-Fi switch with web buttons
7 checks for this build on the ESP32. Work from the top: power first, then each part, then the code.
0 of 7 checked
Power🔧 DC volts, 20 V rangeCheck 1 of 7
ESP32 supply pin
Plug the ESP32 into USB. Black probe on a GND pin, red probe on the 3V3 pin of the board.
You should see: 3.15 to 3.45 V
Readings are compared with the ranges for this build's parts. A meter on the wrong range or a loose probe gives odd numbers: check those first.
Common faults in this build
Never connects: what should I check?
Check the name and password, and that the network is 2.4 GHz, not 5 GHz only.
Relays do not click: what should I check?
Some boards need a 5 V input signal. Use a board with optocouplers, or switch through a transistor.
Page does not open: what should I check?
The phone must be on the same Wi-Fi, not mobile data.
Anyone on the Wi-Fi can switch it: what should I check?
Fine for learning. Add a password page before using it in a shared building.
