Fault finder: ESP32 web dashboard
7 checks for this build on the ESP32. Work from the top: power first, then each part, then the code.
0 of 7 checked
Power🔧 DC volts, 20 V rangeCheck 1 of 7
ESP32 supply pin
Plug the ESP32 into USB. Black probe on a GND pin, red probe on the 3V3 pin of the board.
You should see: 3.15 to 3.45 V
Readings are compared with the ranges for this build's parts. A meter on the wrong range or a loose probe gives odd numbers: check those first.
Common faults in this build
Stuck printing dots: what should I check?
Wrong password or a 5 GHz-only network.
Values show nan: what should I check?
Check DATA is on GPIO4 and the pull-up is fitted, and wait 2 s between reads.
Phone cannot open the page: what should I check?
Phone and ESP32 must be on the same Wi-Fi; guest networks often block devices.
