Fault finder: ESP32 touch-pad piano

5 checks for this build on the ESP32. Work from the top: power first, then each part, then the code.

0 of 5 checked
Power🔧 DC volts, 20 V rangeCheck 1 of 5

ESP32 supply pin

Plug the ESP32 into USB. Black probe on a GND pin, red probe on the 3V3 pin of the board.

You should see: 3.15 to 3.45 V

V

Readings are compared with the ranges for this build's parts. A meter on the wrong range or a loose probe gives odd numbers: check those first.

Common faults in this build

Sounds on its own: what should I check?

Keep the wires short and away from mains cables and hands at start-up.

Never plays: what should I check?

Check the pad GPIO numbers and that the board is the original ESP32.

Wrong notes: what should I check?

Check which pad is on which pin.

No sound: what should I check?

Check the buzzer is passive and wired to GPIO25.

Compile error on ledcAttach: what should I check?

Update or match the ESP32 board package.