Fault finder: ESP32 colour name reader
11 checks for this build on the ESP32. Work from the top: power first, then each part, then the code.
0 of 11 checked
Power🔧 DC volts, 20 V rangeCheck 1 of 11
ESP32 supply pin
Plug the ESP32 into USB. Black probe on a GND pin, red probe on the 3V3 pin of the board.
You should see: 3.15 to 3.45 V
Readings are compared with the ranges for this build's parts. A meter on the wrong range or a loose probe gives odd numbers: check those first.
Common faults in this build
Everything reads the same colour: what should I check?
Press the button with white paper in front of the sensor, and keep the distance steady.
Colours jump between names: what should I check?
Use steady light and avoid direct sunlight or a flickering lamp.
Orange and yellow are confused: what should I check?
Adjust the hue limits for your light.
Sensor not found: what should I check?
Check SDA and SCL and that the module has 3.3 V.
Bright objects read dark: what should I check?
Lower the gain to 1X in the tcs line.
