Fault finder: ESP32 secret knock box

8 checks for this build on the ESP32. Work from the top: power first, then each part, then the code.

0 of 8 checked
Power🔧 DC volts, 20 V rangeCheck 1 of 8

ESP32 supply pin

Plug the ESP32 into USB. Black probe on a GND pin, red probe on the 3V3 pin of the board.

You should see: 3.15 to 3.45 V

V

Readings are compared with the ranges for this build's parts. A meter on the wrong range or a loose probe gives odd numbers: check those first.

Common faults in this build

Knocks are not seen: what should I check?

Check S is on GPIO27 and try ACTIVE_LEVEL set to HIGH.

Too many knocks counted: what should I check?

Fix the sensor firmly to the box, and raise the 120 millisecond limit.

Right rhythm is refused: what should I check?

Raise the TOLERANCE, for example to 250.

Servo twitches or the board resets: what should I check?

Power the servo from a separate 5 V supply with the grounds joined.

Does not compile: what should I check?

Install the ESP32Servo library.