Fault finder: ESP32 sixteen-input keypad on an expander
7 checks for this build on the ESP32. Work from the top: power first, then each part, then the code.
0 of 7 checked
Power🔧 DC volts, 20 V rangeCheck 1 of 7
ESP32 supply pin
Plug the ESP32 into USB. Black probe on a GND pin, red probe on the 3V3 pin of the board.
You should see: 3.15 to 3.45 V
Readings are compared with the ranges for this build's parts. A meter on the wrong range or a loose probe gives odd numbers: check those first.
Common faults in this build
No reaction at all: what should I check?
Check RESET is tied to 3V3 and the address pins.
Keys reported twice: what should I check?
Increase the debounce delay.
Wrong key numbers: what should I check?
Remember port A is keys 0 to 7 and port B is keys 8 to 15.
Compile error: what should I check?
Select ESP32 Dev Module.
Constant presses: what should I check?
A floating pin, check the button goes to GND.
