Fault finder: ESP32 first Wi-Fi web page
7 checks for this build on the ESP32. Work from the top: power first, then each part, then the code.
0 of 7 checked
Power🔧 DC volts, 20 V rangeCheck 1 of 7
ESP32 supply pin
Plug the ESP32 into USB. Black probe on a GND pin, red probe on the 3V3 pin of the board.
You should see: 3.15 to 3.45 V
Readings are compared with the ranges for this build's parts. A meter on the wrong range or a loose probe gives odd numbers: check those first.
Common faults in this build
Stuck at dots: what should I check?
Wrong password or a 5 GHz-only network. Use 2.4 GHz.
Page does not load: what should I check?
Phone and ESP32 are on different networks, or the IP was copied wrongly.
Upload fails: what should I check?
Hold the BOOT button while uploading starts, and check the cable carries data.
LED does not light: what should I check?
Reversed LED or wrong GPIO.
