Fault finder: ESP32 deep sleep timer
7 checks for this build on the ESP32. Work from the top: power first, then each part, then the code.
0 of 7 checked
Power🔧 DC volts, 20 V rangeCheck 1 of 7
ESP32 supply pin
Plug the ESP32 into USB. Black probe on a GND pin, red probe on the 3V3 pin of the board.
You should see: 3.15 to 3.45 V
Readings are compared with the ranges for this build's parts. A meter on the wrong range or a loose probe gives odd numbers: check those first.
Common faults in this build
Counter never rises: what should I check?
Check RTC_DATA_ATTR is on the variable.
No serial output after sleep: what should I check?
Reopen the serial monitor, the USB port can drop on wake-up.
LED does not blink: what should I check?
Check polarity and GPIO26.
Current barely drops: what should I check?
The board USB chip and power LED still draw, that is normal.
Upload fails: what should I check?
Hold BOOT during the upload.
