Fault finder: ESP32-CAM Wi-Fi video stream
5 checks for this build on the ESP32. Work from the top: power first, then each part, then the code.
0 of 5 checked
Power🔧 DC volts, 20 V rangeCheck 1 of 5
ESP32 supply pin
Plug the ESP32 into USB. Black probe on a GND pin, red probe on the 3V3 pin of the board.
You should see: 3.15 to 3.45 V
Readings are compared with the ranges for this build's parts. A meter on the wrong range or a loose probe gives odd numbers: check those first.
Common faults in this build
Camera init failed: what should I check?
The camera ribbon is loose or the wrong board model is selected. Reseat the ribbon latch on the ESP32-CAM.
Brownout resets: what should I check?
Power it from a 5 V 2 A adapter, not a laptop port, and use a short cable.
Stream freezes when a second person opens it: what should I check?
This simple server serves one viewer. Close other tabs.
Grainy picture: what should I check?
Lower jpeg_quality to 10 or use FRAMESIZE_SVGA in good light.
