Projects / ESP32-C3 rain alert / Fault finder

Fault finder: ESP32-C3 rain alert

6 checks for this build on the ESP32. Work from the top: power first, then each part, then the code.

0 of 6 checked
Power🔧 DC volts, 20 V rangeCheck 1 of 6

ESP32 supply pin

Plug the ESP32 into USB. Black probe on a GND pin, red probe on the 3V3 pin of the board.

You should see: 3.15 to 3.45 V

V

Readings are compared with the ranges for this build's parts. A meter on the wrong range or a loose probe gives odd numbers: check those first.

Common faults in this build

Beeps on its own: what should I check?

Raise the wetLevel margin, the dry reading may be noisy.

Never beeps: what should I check?

Check AO is on GPIO2 and VCC on GPIO5, and read the value in the Serial Monitor.

Reading does not change when wet: what should I check?

Check the plate lead is firmly connected.

Plate tracks look green or eaten: what should I check?

Corrosion, replace the plate and keep the power switching.

No sound: what should I check?

Check the buzzer direction and that it is an active buzzer.